1. Support IC incoming packaging in tape and reel,tray.
2. Realize four modes: tape in and tape out,tape in and tray out, tray in and tray out, tray in and tape out.
3. 12 programming stations,with upper and lower CCD visual alignment,and optional dotting function.
4. Drop-in programming sockets for easy and simple operation; different sockets can be pre-loaded as needed, offering flexibility and reducing changeover time.High equipment compatibility.
5. MES system integration.
It's very convenient to program to different packages.
It can accommodate eight programming sockets (the size of the programming sockets depends on the chip size). When replacing chips with different packages, for chips of the same brand, only the socket size needs to be changed. For different brands, only the programmer and programming socket need to be changed, which is simple and convenient.
Chip for marking and dotting function
A dot function can be added when the tape is woven out.(Red, blue, yellow, green, orange)
| Output efficiency |
2000-2500UPH |
| Overall size |
1690*1800*1600MM |
| Support IC packaging |
QFP/QFN/SOP/BGA |
| Programming station |
12 stations |
| Control mode |
Motion control card |
| X-axis |
Linear motor |
| Programming mode |
Lower pressure socket |
| Positioning system |
CCD |
| Tray loading and unloading |
Automatic disk feeding device,up to 20 disks |
| Discharging device |
Adjustable automatic hot pressing film sealing device |
| Input voltage |
AC220/50HZ |
| Power |
1.3KW |
| Air source |
0.4-0.6MPA |
| Total weight |
600KG |
|
|
KA2000 Tray And Tape Integrated IC Programming Machine Automatic IC Burner Images
|
